Description
Description
- The controller can be used for building high-quality 3-axis camera stabilizing systems which can be mounted to UAV and for building handheld camera stabilizers.
- This version of the controller is our new direction in the development of stabilizing solutions. It will replace the previous 8-bit version of the SimpleBGC controller, keeping 100% back-compatibility, but adding the new functionality.
Features
- Size of the board: 50×50 mm
- The distance between the mounting holes: 45 mm
- The diameter of the mounting holes: 3 mm
- Power supply voltage: 3S to 6S
- Maximum motor current: 1,5 A
- 5V output current to power external devices: up to 1 A
Specifications
- Model: GM110-8
- Motor Out Diameter: Ф110±0.05mm
- Motor Height: 26±0.2mm (Included with Encoder housing)
- Hollow Shaft(OD): N/A
- Hollow Shaft(ID): N/A
- Wire Length: 610±3mm
- Cable AWG: #24
- Motor Weight: 534±1g
- Wire plug: 2.5mm dupont connector
- No-load current: 0.09±0.1 A
- No-load volts: 20 V
- No-load Rpm: 125~139 RPM
- Load current: 2 A
- Load volts: 20 V
- Load torque(g): 8000-12000
- Motor internal resistance: 20.19Ω±5%（Resistance varies with temperature）
- High voltage test: DC500V 1mA @2sec
- Rotor housing runout: ≤0.1mm
- Steering (axle extension): clockwise
- High-low temperature test:
- High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
- Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
- Maximum power: ≤60W
- Working current: 4-6S
- Working temperature: -20~60℃;10~90%RH
Packing List
- 3 x GM110-8 Gimbal Motor
- 1 x Alexmos 32BIT BGC set without alum case
- 1 x Connecting cables set