Description
Description
- The GBM2804H-100T motor by iPower Motors are the ultimate brushless gimbal motor for GoPro Cameras.This motor is designed for small multi-rotor platforms looking to lift GoPro sized gear – 0.5-1KG/cm Torque.The principle of the camera stabilization using brushless direct drive motors In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.
Specifications
- Model: GBM2804
- Motor Out Diameter: Ф35±0.05mm
- Motor Height: 15±0.2mm (Included with Encoder housing)
- Hollow Shaft(OD): Ф7-0.008/-0.012 mm
- Hollow Shaft(ID): Ф5+0.05/+0 mm
- Wire Length: 300±3mm
- Cable AWG: #28
- Motor Weight: 39±0.2g
- Wire plug: N/A
- No-load current: 0.07±0.05 A
- No-load volts: 10 V
- No-load Rpm: 1468~1622 RPM
- Load current: 0.8A
- Load volts: 10 V
- Load torque(g): 250-350
- Motor internal resistance: 10Ω±5%（Resistance varies with temperature）
- High voltage test: DC500V 1mA @2sec
- Rotor housing runout: ≤0.1mm
- Steering (axle extension): clockwise
- High-low temperature test:
- High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
- Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
- Maximum power: ≤25W
- Working current: 2-3S
- Working temperature: -20~60℃;10~90%RH
Packing List
- 1 x GBM2804H-100T