Description
Specifications
- Model: GM4108H
- Motor Out Diameter: Ф47±0.05mm
- Motor Height: 32.3±0.2mm (Included with Encoder housing)
- Hollow Shaft(OD): Ф10-0.008/-0.012mm
- Hollow Shaft(ID): 8+0.05/0mm
- Wire Length: 265±3mm
- Cable AWG: #24
- Motor Weight: 137±0.5g
- Wire plug: 2.5mm dupont connector
- No-load current: 0.07±0.1A
- No-load volts: 20V
- No-load Rpm: 513~567 RPM
- Load current: 1.5A
- Load volts: 20V
- Load torque(g): 1200-1800
- Motor internal resistance: 11.1Ω±5%（Resistance varies with temperature）
- High voltage test: DC500V 1mA@2sec
- Rotor housing runout: ≤0.1mm
- Steering (axle extension): Clockwise
- High-low temperature test：
- High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
- Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
- Maximum power: ≤25W
- Working current: 3-5S
- Working temperature: -20~60℃;10~90%RH
Packing List
- 1 x iPower GM4108H-120T Gimbal Motor with AS5048A Encoder