Description
Description
- The GM35 series motor by iPower Motors is the ultimate brushless gimbal motor for SLR and similar weight Cameras. This motor is designed for large-scale multi-rotor platforms looking to lift SLR sized gear – 1.5KG/cm Torque. The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.
Specifications
- Model: GM3506
- Motor Out Diameter: Ф40±0.05mm
- Motor Height: 17.8±0.2mm (Included with Encoder housing)
- Hollow Shaft(OD): Ф12-0.008/-0.012 mm
- Hollow Shaft(ID): Ф8.6+0.05/0 mm
- Wire Length: 610±3mm
- Cable AWG: #24
- Motor Weight: 64±0.2g
- Wire plug: 2.5mm dupont connector
- No-load current: 0.17±0.05 A
- No-load volts: 16V
- No-load Rpm: 2149~2375 RPM
- Load current: 1A
- Load volts: 12V
- Load torque(g): 600-1000
- Motor internal resistance: 5.6Ω±5%（Resistance varies with temperature）
- High voltage test: DC500V 1mA @2sec
- Rotor housing runout: ≤0.1mm
- Steering (axle extension): clockwise
- High-low temperature test:
- High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
- Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
- Maximum power: ≤25W
- Working current: 2-3S
- Working temperature: -20~60℃;10~90%RH
Packing List
- 1 x GM3506 gimbal motor