Description
Note
- Since BLheli32 Configuration is closed due to regulatory issues, if you need to adjust the parameters of this ESC, please download "BLHeliSuite32Test" in the "Download" column of this page.
FC Description
- Introducing the BLITZ H7 Pro Flight Controller - a powerhouse with a dual-sided shielding design that not only protects against interference but also safeguards the controller from debris, ensuring seamless operation. The detachable shielding allows for easy TF card replacement. Upgraded with a robust STM32H743 MCU, it supports input voltages up to 12S and is compatible with ArduPilot firmware, offering customers endless possibilities. Upgrade to the BLITZ H7 Pro for unparalleled performance.
FC Features
- Features 35x35mm mounting holes, providing a larger size for optimized flight controller PCB wiring.
- GH1.25 connector design enhances terminal connection reliability and ensures easy assembly.
- Utilizes an SD card for the flight controller's black box, offering increased capacity to record more flight data.
- Dual-sided shielding design offers interference protection and safeguards the flight controller from foreign object malfunctions.
- Removable expansion soldering pad board enables advanced users to easily connect additional peripherals.
- Incorporates a high-voltage DC-DC buck converter with a chip voltage endurance of up to 100V, delivering stable and reliable voltage for the flight controller and video transmission.
- Supports Betaflight and Ardupilot firmware.
FC Specifications
- Product Name: BLITZ H7 Pro Flight Controller
- MCU: STM32H743
- Gyro: ICM42688
- Baro: DPS310
- OSD: AT7456E
- Input Voltage: 14.8V-50.4V (4S-12S LIPO)
- Blackbox: SD Card
- UARTS: 7
- Smartaudio / IRC Tramp VTX protocol supported
- LED controller: Yes
- Beeper pad: Yes
- Mount pattern: 35*35mm/φ4
- Dimensions: 42*42*11.3mm
- Weight: 20g
- BEC: 5V 3A,12V 2.5A
- BF Firmware target: IFLIGHT_BLITZ_H7_PRO (BF4.4.2)
- Ardupilot Firmware: BlitzH743Pro
FC Wiring Suggestion
- UART1 for VTX HD/Analog
- UART2 for Receiver
- UART4 for GPS
- UART5 for ESC Telemetry
- 8×Dshot/PWM outputs
- 2×I2C for GPS Mag
ESC Description
- BLITZ E80 BLHeli Dshot600 Single ESC was designed to give your motors smooth power with great stability and durability. The 32bit 48mHz G071 MCU and 11 pieces TDK MLCC total 240UF Low ESR capacitors bring faster responding speed and a smoother flying experience.
ESC Highlights
- 2-8S input (max 8S)
- 80A 8 layers 4OZ copper PCB, better operating load capacity;
- 11 pieces TDK MLCC total 420UF Low ESR capacitors, lower ripple and more stable;
- Top grade NTMFS5C430NL MOSFET, stable and reliable;
- 1 * 3528 LED for power- on display;
- Rational layout, large soldering pad, countersinks and semicircle orifices enable each layer to be energized after power-on.
ESC Specifications
- 2-8S input (max 8S)
- 80A 8 layers 4OZ copper PCB, better operating load capacity;
- 11 pieces TDK MLCC total 420UF Low ESR capacitors, lower ripple and more stable;
- Top grade NTMFS5C430NL MOSFET, stable and reliable;
- 1 * 3528 LED for power- on display;
- Rational layout, large soldering pad, countersinks and semicircle orifices enable each layer to be energized after power-on.
ESC Support
- Current Sensor
- Telemetry output
- Motor Timing
- Brake on Stop
Packing List
- 1 x BLITZ H7 Pro Flight Controller
- 8 x BLITZ E80 Single ESC with CNC Alum Cover（Combo1）
- 8 x 50V 1000UF capacitor（Combo1）
- 8 x Power cables & ESC signal wires（Combo1）
- 2 x BLITZ Pro PDB（Combo1）
- 4 x BLITZ E80 Single ESC with CNC Alum Cover（Combo2）
- 4 x 50V 1000UF capacitor（Combo2）
- 4 x Power cables & ESC signal wires（Combo2）
- 1 x Screws Pack
- 1 x USB Adapter Board