Description
Descriptions
- The Protek CineWhoop has a longer flight experience and weighs less than the previous cineshoops! The new version of Protek35 has been released, we upgraded the frame to be compatible with DJI O3 air unit.
- iFlight was able to increase the speed and thrust by 50% compared to its 3-inch predecessor which gives a lot more room for a lot more fun; as a result, the ProTek35 is equipped with the Butter Smooth 2205 2300KV Motors. It also features the DJI O3 air unit, BLITZ whoop F7 AIO, 55A 2-6S ESC, Nazgul 3535 propellers, and more!
Highlights
- No Props or frame in view!
- DJI O3 HD Air Unit Low-Latency digital transmission
- Secured Battery Plug and CNC bracket - Easy to install battery straps
- High-performance True-AIO Board BLITZ F7 AIO 55A to save weight and space
- T700 Quality Carbon - 40% more tensile strength compared to common 3K carbon
- Lightweight one-piece frame design - Less flexibility, more Rigid, more Durable
- Low Resonance frame construction - Less Jello, more Cinematic footage
Specifications
- Product Name: ProTek35 V1.4 O3 6S HD
- AIO: BLITZ Whoop F7 AIO
- Video Transmission: DJI O3 Air Unit
- Frame: 151mm wheelbase
- Motor: XING 2205 motors
- Prop: Nazgul 3535 propellers
- Takeoff Weight: Approx. 363 g (Without Battery)
- Dimensions (L×W×H): 217×194×32.5 mm
- Max Speed: 140 Km/h
- Maximum Takeoff Altitude: 5000 m
- Max Hover Time: Approx. 6 mins(With 1400 battery no load)
- Max Wind Speed Resistance: Level 4
- Operating Temperature Range: -10° to 40° C (14° to 104° F)
- Antennas: Single Antenna
- GNSS: N/A
Video Transmission
- Product Name: DJI O3 Air Unit
- Weight: Approx. 36.4 grams(headband included)
- Communication Bandwidth: Max 40 MHz
- FOV (single screen): 155°
- Communication Frequency:2.400-2.4835 GHz (RX only) / 5.725-5.850 GHz (RX and TX)
- End-to-End Latency
- With DJI FPV Goggles V2:
- 810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
- 810p/60fps Video Transmission Quality: The latency is lower than 40 ms.
- With DJI Goggles 2:
- 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
- 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.
- Max Video Transmission Bitrate: 50 Mbps
- Max Video Transmission Range:10 km (FCC), 2 km (CE), 6 km (SRRC)
- Operating Temperature Range: -10º to 40º C (14° to 104° F)
- Power Input: 7.4-26.4 V
- Audio Transmission: N/A
Packing List
- 1 x ProTek35 V1.4 O3 6S HD BNF
- 1 x 3.5 inch prop (2 pairs)
- 2 x Battery pad
- 1 x Battery strap
Pre-tuned & Presetup
- Don't worry about tuning, iflight did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
- To restore lost tunes or updates, please check linked article on "Firmware/Factory Dumps"
- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
- Please check linked article on "How to disable Angle-Mode, activate Acro-Mode"
Note
1. iFlight products may be used for civilian purposes only and any direct or indirect use of iFlight products for or in connection with the following is prohibited:
(1)Any military combat purpose or military combat related use;
(2)Terrorist activities: The purchaser also shall require its customers or end users to comply with the foregoing requirements.
2. If party A has violated applicable export control or economic sanctions laws and regulations, Party B has the right to immediately suspend delivery of products to Party A or terminate relevant cooperation without any liability.