Description
FC Specifications
- MCU: AT32F435CGU7
- Gyro: ICM42688
- Barometer: DPS310
- OSD Chip: AT7456E
- Flash: 32MB (Blackbox flash)
- UARTS: 6
- Motor outputs: 4x (SH1.0 connector)
- I2C serial: SDA / SLA pads
- Smartaudio / IRC Tramp VTX protocol supported
- LED controller: Yes
- Beeper pad: Yes
- Firmware target: IFLIGHT_BLITZ_ATF435
- Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
- Dimensions: 36.5*35 mm
- Weight: 7.8g
- BEC: 5V 2.5A / 9V 2A
ESC Specifications
- Mounting Holes: 30.5*30.5mm/Φ4mm
- Weight: 14.7g
- Supports 2-6S lipo input
- MCU: G071
- Constant: 55 Amps
- Burst: 65 Amps
- Current sensor: Yes
- BEC: No
- Current rate: 200
- Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
- Target: Q-H-25 16.7(BlheliS) / Bluejay Q-H-50 (Bluejay)
Packing List
- 1 x BLITZ ATF435 Flight Controller
- 1 x BLITZ E55S 4-IN-1 2-6S ESC
- 1 x wire harness for ATF435 Flight controller
- 1 x silicon grommets