Description
Features
- Improved circuit design, better components and lower electrical noise!
- DJI HD VTX Connector (Plug-and-Play / No soldering required)
- FC indicator LEDs for visual debugging
- BLITZ E80 BLHeli Dshot600 Single ESC was designed to give your motors smooth power with great stability and
- durability. The 32bit 48mHz G071 MCU and 11 pieces TDK MLCC total 240UF Low ESR capacitors bring faster
- responding speed and a smoother flying experience.
FC Specifications
- Product Name: BLITZ F7 Pro Flight Controller
- Mount pattern: 35*35mm/ 4mm PCB hole diameter
- Smartaudio / IRC Tramp VTX protocol supported
- Firmware target: IFLIGHT_BLITZ_F7_PRO
- Input Voltage: 14.8V-34V (4S-8S LIPO)
- Motor outputs: 4x (SH1.25 connector)
- Flash: 512MB (Blackbox flash)
- I2C serial: SDA / SLA pads
- Dimensions: 41*41.5mm
- Barometer: DPS310
- OSD Chip: AT7456E
- LED controller: Yes
- MCU: STM32 F722
- Weight: 17g (±2)
- Beeper pad: Yes
- Gyro: BMI270
- UARTS: 4
ESC Specifications
- Product Name: BLITZ E80 Single ESC
- Input Voltage: 2-8S
- Max. Continuous Current: 80A
- Max. Burst Current: 100A
- MCU: G071
- BEC: No
- Firmware: BLHeli32
- Current Sensor: Yes
- Telemetry: Supported
- Target: IFLIGHT_BLITZ_G2
- Dimensions: L40 x W17 x W10mm
- Weight: 9.5g(±2)
- Protocal: DShot DShot150/300/600/MultiShot/OneShot PWM Drive
Packing List
- 1 x BLITZ F7 Pro Flight Controller
- 8 x BLITZ E80 Single ESC with CNC Alum Cover(Combo1)
- 8 x 50V 470UF capacitor(Combo1)
- 8 x Power cables & ESC signal wires(Combo1)
- 2 x BLITZ Pro PDB(Combo1)
- 4 x BLITZ E80 Single ESC with CNC Alum Cover(Combo2)
- 4 x 50V 470UF capacitor(Combo2)
- 4 x Power cables & ESC signal wires(Combo2)
- 1 x BLITZ Pro PDB
- 1 x Screws Pack
- 1 x USB Adapter Board