Description
Descriptions
- iFlight Defender series features a better flying experience and performance with the next upcoming innovative step. Now is the time to take a step forward, let's meet the Defender 16. With the integrated All-In-One design and extremely convenient user experience, the new Defender has created a new standard of FPV drones. Upgraded quick-release battery and charging adapter to support Type C fast charging and battery storage mode, making everything as easy as it can be. One-button power switch with inbuilt programmable RGB light, yes we can be stylish and functional.
Highlights
Remarkably Lightweight And Portable
The palm-sized, compact Defender 16 is just as portable as it can be. The whole frame is injection molded for durability and lightweight, equipped with a naked DJI O3 air unit (Supplied by DJI), the Defender 16 is by far our smallest and lightest 4K whoop drone with 128g takeoff weight. It's not only regulation-friendly, but also the safest in its series, allowing you to fly anywhere and whenever.
One-button Functional Power Switch
Better operation through one physical button, not only just power on and off but also inbuilt programmable RGB light colors and modes to visually display the battery power. We’ve added a protective circuit to extend the lifespan of the battery connector and prevent rapid voltage or current spikes which can protect your electronics from damage.
Innovative Quick-Release Battery with Type-C Charger
The Defender 16 comes with a stock 2S 900mAh providing up to 6min flight time. Crash protected battery shell and innovative quick-release structure for easy replacement. Upgraded plug and play Type-C charger for user-friendly fast charging, get 80% charge in just 18 minutes. The battery has an inbuilt auto-discharge module, it will discharge itself when not in use, making it safe and worry-free.
Extremely Convenient User Experience
No fear of dust, take off boldly. By using dustproof port plugs to isolate the interface from the outside, ensure function properly. Extend the life of the interface.
The drone can be disassembled with only 6 screws, making it much more convenient for maintenance and repair.
Full plug and play high performance AIO, 30% increase in redundancy to cope with extreme operations. Integrated beeper for quick retrieval of accidental loss.
All ports and buttons are easy to access.
Countless easy-to-use features let you get started right away.
1) Turtle Mode pre-setup.
2) No soldering is required for the whole drone, motors, and propellers adopting the plug-in mounting method.
3) A dedicated VTX mount bracket with a central grille opening, together with the air duct design in the drone, can dissipate heat when flying.
4) USER1 preset as video transmitter power supply switch, used to manually turn off the VTX when idle to safe power and prevent overheating.
5) Customized vibration damped O3 camera mount to keep your raw footage as smooth as possible, as well as ensure good Gyro Data for the in-built or in-post camera stabilization, jello free.
Specifications
- Product Name: Defender 16 O3 2S HD
- Flight Electronics: Defender 16/20 F411 AIO
- Video Transmission: DJI O3 Air Unit (Naked version)
- Frame wheelbase: 81mm
- Motor: Defender16 1103 14000KV motors
- Prop: Defender 16 1809-3 Propellers
- Takeoff Weight incl. 900mAh battery: 128g
- Dimensions (L×W×H)：121x117x47mm
- Max Speed: 55Km/H (Manual Mode)
- Maximum Takeoff Altitude: 2000 m
- Max Hover Time: Approx. 6 mins(with 2S 900mAh battery)
- Max Wind Speed Resistance: Level 3
- Operating Temperature Range: -10° to 40° C (14° to 104° F)
- Antennas: Dual Antennas
- GNSS: N/A
Video Transmission
- Product Name: Naked DJI O3 Air Unit
- Communication Bandwidth： Max 40 MHz
- FOV (single screen): 155°
- Communication Frequency: 2.400-2.4835 GHz (RX only)；5.725-5.850 GHz(RX and TX)
- End-to-End Latency
- With DJI FPV Goggles V2:
- 810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
- 810p/60fps Video Transmission Quality: The latency is lower than 40 ms.
- With DJI Goggles 2:
- 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
- 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.
- Max Video Transmission Bitrate: 50 Mbps
- Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC)
- Operating Temperature Range: -10º to 40º C (14° to 104° F)
- Power Input: 7.4-26.4 V
- Audio Transmission: N/A
FPV Radio
- Product Name: Commando 8 ELRS Radio
- Weight: 310g (±10g）
- Dimentions(LxWxH): L 190 x W 150 x H 51mm
- Communication Frequency: 5.725-5.850 GHz
- Transmission Power(EIRP):
- 2.4GHz: FCC: 27 dBm; CE: <14 dBm; SRRC: <19 dBm
- 900MHz:FCC: 30 dBm; CE: <14 dBm; SRRC: <19 dBm
- Operating Current/Volts: 0.6 A @ 7.6 V
- Charging Time: 1 hour and 30 mini
- Operating Time: Approx. 8 hours
- Operating Temperature Range: 0°C to 40°C（32°F to 104°F）
- Charging Temperature Range: 5°C to 40°C（41°F to 104°F）
FPV Goggles
- Product Name: DJI Goggles 2
- Weight: Approx. 290 grams（headband included）
- Dimensions (L×W×H): L167 * W1039 * H 813mm
- Screen Size (single screen): 0.49-inch
- Resolution (single screen): 1920×1080
- Refresh Rate: Up to 100 Hz
- Interpupillary Distance Range: 56-72 mm
- Diopter Adjustment Range: -8.0 D to +2.0 D
- FOV (single screen): 51°
- Communication Frequency: 2.400-2.4835 GHz；5.725-5.850 GHz
- Transmission Power (EIRP):
- 2.4 GHz: < 30 dBm (FCC), < 20 dBm (CE/SRRC/KC)
- 5.8 GHz [4]: < 30 dBm (FCC), < 23 dBm (SRRC), < 14 dBm (CE/KC)
- Max Video Transmission Bitrate: 50 Mbps
- Operating Temperature Range: 0° to 40° C (32° to 104° F)
- Power Input: 7-9 V (1.5 A)
Packing List
- 1 x Defender 16 O3 HD BNF
- 1 x Commando8 Radio Transmitter ELRS V2
- 1 x DJI Goggles 2
- 1 x Defender 16 900mAh Battery
- 1 x Charging Adapter Board
- 4 x GEMFAN 45mm Props(Pairs)
- 4 x Defender 16 Props (pairs)
- 1 x Propeller Removal Tool
- 1 x Defender 16 Carrying Case
- 1 x PD30W Charger
- 1 x Type C Digital Display Charge Cable
Important
- All iFlight BNFs are tested before shipment to guarantee the highest quality.
- If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.
Note
1. iFlight products may be used for civilian purposes only and any direct or indirect use of iFlight products for or in connection with the following is prohibited:
(1)Any military combat purpose or military combat related use;
(2)Terrorist activities: The purchaser also shall require its customers or end users to comply with the foregoing requirements.
2. If party A has violated applicable export control or economic sanctions laws and regulations, Party B has the right to immediately suspend delivery of products to Party A or terminate relevant cooperation without any liability.
