Electronics


iFlight SucceX-E 45A V2 2-6S BLHeli_S 4-in-1 ESC

$33.99

ESC // SucceX-E 45A V2 2-6S BLHeli_S 4-in-1 ESC- Dimension: 36*43mm- Mounting Holes: 30.5*30.5mm/Φ3mm- Weight: 15g (without wire)- Supports 2-6S Lipo input- STM32F051 MCU, 24Mhz Runs BLHeli_S 16.X Firmware- Current sensor: YES- BEC: NO-Cons..

iFlight SucceX-E F7 45A V2 2-6S Flight Stack (MPU6000)

$105.00

FC // SucceX-E F7Top Features:- Gold-plated plug- BlackBox: 8MB- Vista HD Plug-and-Play. No need to solder tiny wires.- BAT, +5V, 3.3, Start indicator- Smartaudio & IRC Tramp VTX protocol supported Specifications:- MCU: STM32F..

iFlight Naked GoPro Hero 8 Case TPU with BEC Board

$33.99

It is 3D printed with high quality TPU filament for the GoPro Hero 8 camera, which is durable and flexible to fix and protect the camera well.  It is with a BEC board, The BEC board is also special designed for the Naked..

iFlight SucceX Force 5.8GHz 800mW VTX Adjustable

$35.99

..

iFlight SucceX Micro 12A V1.2 2-4S BLHeli_S Dshot600 4-in-1 ESC (M3 hole)

$12.00

SucceX Micro 12A V1.2 2-4S 4-in-1 ESC Dshot600 (M3 hole) -Firmware: G-H-30 BLS 16.7 -BLHeliSuite: http://www.mediafire.com/file/1tn449x6815upat/BLHeliSuite16714901.zip/file-Input voltage : 2-4S LIPO-Continuous current: 12A-MCU: BB21F16..

iFlight SucceX Micro F4 2-4S V2.1 Flight Controller(MPU6000,M3)

$25.99

SucceX Micro F4 2-4S V2.1 Flight Controller(MPU6000,M3)-STM32F411-Input voltage 2-4S LIPO-Gyro: MPU6000-2x UART ports-4x motor outputs-Betaflight OSD :YES-Blackbox FLASH: 8MB-BEC 5V 2.5A cont.-Size: 21mm*21mm-Mounting holes distance: 16*16mm-Weight: ..

iFlight SucceX Micro F4 V1.5 Flight Controller - (MPU6000,M3)

$15.00

SucceX Micro F4 V1.5 Flight Controller -  (MPU6000,M3)-STM32F411-Input voltage 2-4S LIPO-Gyro: MPU6000-2x UART ports-4x motor outputs-Betaflight OSD :YES-Blackbox FLASH: 8MB-BEC 5V 2.5A cont.-Size: 21mm*21mm-Mounting holes distance: 16*16mm-Weig..

iFlight SucceX-D 20A Whoop F4 AIO Board (MPU6000)

$67.99

Top Features:• DJI Plug-and-Play - No need to solder tiny wires!FC // SucceX-D F4 AIOSize:30.5*30.5mmMounting pattern:25.5*25.5mm/φ3mmConnector:Micro-USBMCU:STM32F411Gyro:MPU6000Blackbox:8MBBEC  output: 5V 2AINA pad:nR2Barometer:noConstant curre..

iFlight SucceX-E 45A 2-6S BLHeli_S Dshot600 4-in-1 ESC

$29.99

ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC- Dimension: 40*43mm- Mounting Holes: 30.5*30.5mm/Φ3mm- Weight: 14.4g- Supports 2-6S Lipo input- STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware- Current sensor: YES- BEC: NO- Supports: DShot150/30..

iFlight 2PCS Type C to 5V Balance Plug Power Cable for GoPro Hero 6/7/8/9

$12.99

Features:- Compatible with all USB Type-C powered hardware or cameras (GoPro Hero 5/6/7/8/9, Insta360, etc.)- Stable power supply from any LiPo (4S-6S input)- High power output (up to 5V/3A)Specification:Model: Type-C 90 degree to balance plugProduct..

iFlight 3-6S Micro 5V 2A BEC

$5.99

This micro-sized step-down voltage regulator is perfect for supplying 12v power (from a higher voltage source like 4S or 5S, even 6S Lipo) to your FPV gear that needs specifically 5V Range.  Power 5V flight cameras, LED lights or other gear that..

iFlight LC Filter Module 2A 3A

$4.99

In the quadcopter, Motors and ESCs can generate noise which can affect your FPV video quality. This compact and effective LC type filter uses large value inductor and capacitor components,  designed to clean a noisy DC power supply which often c..

iFlight LED Strip Smart Controller Board

$6.99

- Supports (4) Ultra Bright LED Strip- Incredibly Compact & Easy To Install- Fully Adjustable Color & LED Light Pattern- Brightness Adjustable for Maximum LED Control- Transmitter & Button Based Setup for Maximum Flexibility- Power in: 2S..

iFlight Micro 2-8S BEC - 5V/12V Output

$6.99

The iFlight Micro BEC features step-down switch mode, high-efficiency synchronous rectification, and the ability to step down from an input voltage of up to 36V to a low output stable voltage, which makes it ideal for step-down voltage applications.I..

iFlight Programmable RGB 5 LED lights (4pcs)

$7.99

The led board has 5 super bright RBG LEDs, which can be installed as RGB LED Tail Light, arms, or other Betaflight LED addressable boards. The LEDs need 5v, ground and a signal source in order to work.The layout of the PCB board keeps wirin..

iFlight RGB 10 LED 3535 Multi-Colors Race Wire (4pcs)

$12.99

The traditional race wires prevent damage to wires or even propeller strikes from dropping you out of the air, while also making motor swaps super fast and easy without the need to open up your quad to access your 4in1 ESC or AIO board. that is a kin..

Showing 1 to 16 of 22 (2 Pages)